New method for determining P‐S‐N curves in terms of equivalent fatigue lives

A new method for determining the P‐S‐N curves is proposed by the probabilistic analysis of the mixed samples that are composed of the testing fatigue lives and equivalent fatigue lives. The equivalent fatigue lives at each level are converted from all the testing data at all the testing levels according to the equivalent fatigue failure probability, where the life distributions are determined by the medians of logarithmic fatigue lives at respective levels and a unified coefficient of variation. Comparison results of the P‐S‐N curves of 2024‐T3 and A356.0‐T6 alloys with the different methods indicate that the new method can determine the high‐precision P‐S‐N curves with different sample sizes of the S‐N testing data, and can save testing time and improve testing efficiency, especially for the situation of large‐scatter S‐N testing data.     

融合大数据技术和工艺经验的高炉参数优化

 为了更精准地评判高炉运行情况，量化高炉指导方针。根据高炉生产过程的特点，应用大数据技术对高炉生产参数与铁水产量和高炉能耗等指标进行数据驱动分析，提出了一种优化高炉生产参数的新方法。首先，对某钢铁厂高炉各工序历史数据进行了采集、清洗、过滤和整合，建立了高炉数据仓库。然后，将多种聚类算法相结合，完成了对高炉炉况变化的详细划分。运用工艺经验与递归特征消除算法相结合，全面筛选得到能够反映炉况波动的强相关变量。应用统计学方法分析得出Class_a炉况对应的核心参数的最优范围，这对指导现场生产、保持高炉长期稳定顺行具有重要意义。     

Modular Self‐Assembling Peptide Platform with a Tunable Thermoresponsiveness via a Single Amino Acid Substitution

The introduction of a stimulus‐responsive property is an effective way to increase the applicability of functional materials in the field of nanobiotechnology. Herein, a peptide platform is devised for constructing elastin‐like peptide amphiphiles (ELPAs) that exhibit a temperature‐responsiveness that can be easily tuned via a single N‐terminal amino acid substitution at the final step of peptide synthesis. Due to the modular property of peptides, the platform based on a miniaturized elastin‐like peptide (MELP) can be conjugated with various bioactive peptide sequences in diverse macromolecular topologies. First, the MELP platform is coupled with a short linear RGD peptide. The ELPAs of the peptide conjugates exhibit rapid aggregation (coacervation) and retard disaggregation in response to heating and cooling, respectively. Second, the platform is grafted with an α‐helical guest peptide in a lariat‐type structure, which forms ELPAs that undergo faster disassembly than the ELPAs without the guest peptide in response to temperature increases. Interestingly, the critical temperatures for the thermoresponsive behaviors are commonly dependent on the hydrophobic and aromatic properties of the N‐terminal amino acid residues. These results suggest that this peptide platform possesses great potential for use in the development of smart materials in wide‐ranging applications related to temperature change.     

Estimation of Antenna Correlation Coefficient of N-Port Lossy MIMO Array

This paper proposes a simple yet accurate method for estimating the antenna correlation coefficient (ACC) of a high-order multiple-input multiple-output (MIMO) antenna. The conventional method employed to obtain the ACC from three-dimensional radiation patterns is costly and difficult to measure. An alternate method is to use the S-parameters, which can be easily measured using a network analyzer. However, this method assumes that the antennas are highly efficient, and it is therefore not suitable for lossy MIMO antenna arrays. To overcome this limitation, we define and utilize the non-coupled radiation efficiency in the S-parameter-based ACC formula. The accuracy of the proposed method is verified by the simulation results of a 4-port highly coupled lossy MIMO array. Further, the proposed method can be applied to N-port arrays by expanding the calculation matrix.     

A Modular Solder System with Hierarchical Morphology and Backward Compatibility

A modular solder system with hierarchical morphology and micro/nanofeatures in which solder nanoparticles are distributed on the surface of template micropowders is reported. A core–shell structure of subsidiary nanostructures, which improved the intended properties of the modular solder is also presented. In addition, polymer additives can be used not only as an adhesive (like epoxy resin) but also to impart other functions. By combining all of these, it is determined that the modular solder system is able to increase reflowability on a heat‐sensitive plastic substrate, oxidation resistance, and electrical conductivity. In this respect, the system could be readily modified by changing the structure and composition of each constituent and adopting backward compatibility with which the knowledge and information attained from a previously designed solder can offer feedback toward further improving the properties of a newly designed one. In practice, In–Sn–Bi nanoparticles engineered on the surface of Sn–Zn micropowders result in pronounced reflowing on a flexible Au‐coated polyethylene terephthalate (PET) substrate even at the low temperature of 110 °C. Depending on their respective concentrations, the incorporation of CuO@CeO₂ nanostructures and poly(3,4‐ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) polymers increases oxidation resistance and electrical conductivity of the modular solder.     

Hydrodistillation condition adjustment for different material particle sizes: a method to increase batch‐to‐batch quality consistency

Varying material particle sizes represent a common contributing factor to the batch‐to‐batch variation of extraction yields. To increase the batch‐to‐batch quality consistency of extracts, a method was proposed to adjust the extraction conditions for different material particle sizes, taking the hydrodistillation extraction process of Radix Curcumae and Fructus Gardeniae as a case study. Statistical models were built for five sesquiterpenes including curcumenone, curcumenol, curdione, curzerenone and furanodienone, to quantitatively describe the effects of particle size and process parameters on their extraction yields. An increase in sodium chloride concentration remarkably increased the yields of curcumenone and curcumenol, and a larger solvent‐to‐solid ratio increased the yields of five sesquiterpenes. Under the adjusted process parameters for two different particle sizes, the yield for each compound was controlled to fall in the 90–110% target range. The proposed method can be applied to various extraction processes of foods and herbal medicines.     

Cutting parameter optimization for one-step shaft excavation technique based on parallel cutting method

The outcome of the cutting blasting in a one-step shaft excavation is heavily related to the cutting parameters used for parallel cutting method. In this study, the relationships between the cutting parameters (such as the hole spacing L and the empty hole diameter D) and damage zones were investigated by numerical simulation. A damage state index γ was introduced and used to characterize the crushing and crack damage zones through a user-defined subroutine. Two indices, i.e., η₁ and η₂ that can reflect the cutting performance, were also introduced. The simulation results indicate that an optimal value of L can be obtained so that the η₁ and η₂ can reach their optimal states for the best cutting performance. A larger D results in better cutting performance when the L value maintains its best. In addition, the influences of the loading rate and the in-situ stress on the cutting performance were investigated. It is found that an explosive with a high loading rate is suit for cutting blasting. The propagation direction and the length of the tensile cracks are affected by the direction and the magnitude of the maximum principal stress.     

Variability in rheology of cemented paste backfill with hydration age,binder and superplasticizer dosages

The use of (CPB) material to ameliorate geotechnical stability of underground mine is in nascent stage in India. Rheological properties of CPB change with travelling time as it is transported to underground mine stope through pipeline reticulation. In this paper, rheological properties of CPB based on mill tailings of a carbonate rich mineral processing waste are evaluated for different dosages of polycarboxylate (PC) based (SP). Each CPB sample having 78?wt% solids is mixed separately with 4%, 6% or 8% of binder dosages (ratio of the weight of dry binder to the weight of dry tailings) and, 0%, 0.5%, or 1.0% of SP dosages as weight of dry binder. The paper presents a methodology for determining yield stress, plastic viscosity and thixotropic behaviour of CPB mixture as a function of hydration age, binder and SP dosages. Results from the experimental campaigns indicate that SP content has significant influence on rheological behaviour of CPB and can be suitably exploited to enhance the flow characteristics of the carbonate rich process tailings. The study also develops multivariate linear regression models of yield stress, plastic viscosity and thixotropy of CPB depending on the hydration age, binder and SP dosages.     

An enhanced state estimation for linear parabolic PDE systems with mobile sensors

This paper studies an enhanced state estimation problem of distributed parameter processes modeled by a linear parabolic partial differential equation using mobile sensors. The proposed estimation scheme contains a state estimator and the guidance of mobile sensors, where the spatial domain is decomposed into multiple subdomains according to the number of sensors and each sensor is capable of moving within the respective subdomain. The state estimator is desired to make the state estimation error system exponentially stable while providing an performance bound. The mobile sensor guidance is used to enhance the transient performance of the error system. By the Lyapunov direct technique, an integrated design of state estimator and mobile sensor guidance laws is developed in the form of bilinear matrix inequalities (BMIs) to meet the desired design objectives. Moreover, to make the performance bound as small as possible, a suboptimal enhanced state estimation problem is formulated as a BMI optimization one, which can be solved via an iterative linear matrix inequality algorithm. Finally, numerical simulations are given to show the effectiveness of the proposed method.